Hi Guys,
I am looking for the installation information for Open text Imaging.
Searched for it but could not get anything concrete.
Any leads on this would be appreciated.
Thanks and Regards,
Ankit Mishra
↧
OpenText Imaging Windows Viewer version 9.7.0
↧
Issue with Adminsecurity=1
Hello
The SAP Content server installation and content repository creation in SAP has been done in our sandbox system. The connectivity test from SAP to SAP content server is also Good. I have used the Filesystem as the storage type.
When tried to add security to it by activating the below fields in cs.conf, I am unable to login with 'sapcs' user in SAP whenever I login to CSADMIN. It says "HTTP error: 401 Authorization Required Bad local password for user sapcs"
AdminSecurity=1
AdminSecurityGroup=sapsys
I checked that the user 'sapcs' is part of /etc/passwd file and it also is a member of 'sapsys' group, but login still fails with the same error. Can someone help here?
Regards
VK
↧
↧
Uploading and Downloading files to DMS
Hi Experts,
In my webdynpro application, I have a requirement to store multiple documents (Like certificates) for each vendors in DMS, display them and update them when required. I am very new to DMS. Is that possible to create a single document for a given vendor and put all the corresponding files as Originals in that document? If yes, using what field do I differentiate these originals when I want to display any of them? Could you also tell me the BAPIs that are used to upload and download them and the procedure to use them? I have found little help regarding this in net... any help will be greatly appreciated.
Thanks
Ajith C
↧
Webdynpro Tutorials
Dear Friends,
I am looking for tutorials of webdynpro, the video would be better,
Thanks
↧
SSF Kernel Error
Hi I am trying to import license for the portal, and I am getting error.
so i did some research and tried to do follow the note 662340 - SSF Encryption Using the SAPCryptolib
, but realized that the steps are rathering confusing.
I am confused at the part
Configuring Application-Specific Settings
Not sure what I am supposed to achieve or do there?
Can anyone please guide me, tks.
↧
↧
Http 404 error in CSADMIN
Hello
We installed SAP Content server following the guide "ContServ_UNIX_640ContServ_UNIX_640" on a new server without MAXDB. We need to use the File system as storage type. We are doing this for the first time. Below are the details
OS: Linux
Apache version 2.0
After the sapinst was successfully compelted, I am unable to proceed further with the post installation steps that says
1. Set up repositories.
2. Make the repositories known to your SAP system.
3. Issue certificates, if necessary.
4. Change the password for the database users.
In the SAP system, when I tried to create a Content repository in OAC0 by selecting 'HTTP Content Server' as the storage type, it is failing with HTTP 404 error always.
I filled the following fields while creating the content repository
Version: 0046
HTTP server: IP Address of the content server
Port: Default port
HTTP script:
Could you kindly help to answer the following:
1) Wat storage type needs to be selected for the File system. Is it Http content server, logical repository, RFC archive or Structure storage system?
2) What are the steps for the file system as storage type.
Regards
VK
↧
REMAINDER MAIL IN KM
Dear Experts,
Is their any chance to get remainder mail to end user Through KM.Can you please guide me on this?
Regards
Kalyan
↧
SAP DMS Configuration - Change Content Server
Hello Everyone;
I am working on an ERP 6.0 system that has a working DMS system along with it. I am using MAXDB 7.6 for my DMS system.
The current external content server is a physical machine. I took a snapshot from this physical machine, and created a new virtual machine from it.
What I need to do now is to assign this new virtual machine as an external content server instead of the current physical machine.
I started working on OAC0 to edit the current content repository, and changed only the current HTTP Server IP from my old physical machine to the new http server of the virtual machine which should be the exact image as my old content server.
Is changing the HTTP Server is the only thing I need to change to switch from my old content server to the new content server taking into consideration that my new virtual machine is an exact image of the old content server.
Best Regards
~Amal Aloun
↧
How to archive non SAP documents using open text
Hello Experts,
Greetings, I have a requirement to archive the non SAP documents like E-mail, scanned document and scanned images using the open text.
This is something new for me and as well as for my customer.
At this moment the current system is completely manual the letters or emails (both inbound and outbound) are stored in paper based system. They want to change this system by using the open text.
Scenario may be like this for a business partner there will be lot of Inbound and Outbound communications happening, all these communications should be stored in Open text (or equivalent storage using Open text) and the link should be stored against the business partner.
I have few questions regarding this.
1. Which team will take care of the integration of Open text with SAP?
2. Once the Open text is integrated with SAP how can I archive the non SAP documents through Open text? (Just an overview or Step by Step procedure will help me)
[If this question in posted in wrong discussion forum, please forgive me and advise me the right forum]
Thanks in Advance
Nivash
↧
↧
cl_rmps_general_functions=>create_dark - Document created without SRM_ID_DOCUMENT
Hi experts,
We're using the function cl_rmps_general_functions=>create_dark to create incoming post from a local program.
When the program was run on our system ECC6 EHP6 SP04.
The incoming post was created the property SRM_DOCUMENT_ID was set according to the rule specified in the custo. When we open the incoming post through transaction SCASEPS, we hade the document ID displayed
After the upgrade to ECC6 EHP6 SP09.
The document is created, SRM_DOCUMENT_ID is mentionned as property. (it is set in the code, the attribute change value is recorded in the table SRMPROTOCOL). But, when we open the incoming post with transaction SCASEPS the document id is equal to [...]
Does anyone have already encountered this problem?
I already checked for sap notes, without success.
Thanks in advance for your help !
Regards
Hamza
(every valuable answer will be rewarded)
↧
ContentServer: can´t upload Large objects
Hi Experts,
I have aproblem withmyCRM systemwhen tryingto upload filesmore than40mb through thetransaction SCASE, it showsthe following errorwithout furtherinformation"Operationisnot allowed(CRM_P_CASE)"
Something strangeis that this erroronly appears inourdevelopmentand productionsystem. The quality systemcan uploadfiles larger than80mb with no problem
Ourbuild contentserveristhe 201version 46
I've alreadycheckedSAPNote328209andchange theparameterMaxTransferBlockSize modifying theContentServer.INIbeingas follows:
[ContentServer]
KeepConnection=0
AdminSecurity=1
ContRepRoot=P:\ContentServer
Storage=FileSystemStorage.dll
ContentStorageHost=@StorageHost@
ContentStorageName=@StorageName@
MaxTransferBlockSize=131070
[contRep-Z_CONT_CSP_DEV]
ContentStorageHost=cspjalcmn01
ContRepRoot=\\cspjalcmn01\ContentServer
Storage=FileSystemStorage.dll
Security=1
ContRepDescription=CSP Content Server - Repository
[contRep-ZCRMORDER]
ContRepRoot=\\cspjalcmn01\ContentServer
ContentStorageHost=cspjalcmn01
ContRepDescription=CSP Content Server - Repository
Storage=FileSystemStorage.dll
Security=1
I thinkthe erroris no longer inthecontentserver andthe problem maybe someconfiguration orparameteris missing inDEVand PRO systems, because QAS system is okay. It's justthat I can notidentify
Best Regards ¡¡¡
↧
Opentext Enterprise Scan with Opentext Archive Server
Hi
OpenText Enterprise Scan 10.2 with OpenText Archive Server10.5. I am trying to configure scanning will be directly indexed and archive to opentext Archive server for the OpenText Enterprise Scan client ( scanning station )
I would request anyone help me with the configuration
Thanks
Al Mamun
↧
OpenText Imaging Windows Viewer version 9.7.0
Hi Guys,
I am looking for the installation information for Open text Imaging.
Searched for it but could not get anything concrete.
Any leads on this would be appreciated.
Thanks and Regards,
Ankit Mishra
↧
↧
Http error 405 method not allowed Content Server 6.40
Hello gurus
Iam trying to configure SAP Content Server 6.40 on a Solaris Sparc with Maxdb.The Content Server is running on a separate box.The CS and DB installation completed successfully.I nstalled the apache web Server which i downloaded from Apache webserver and unistalled the one that comes with Solaris.
Iam now facing problems when i try to connect to the repostories which i have created on the SAP backend.
Below are the following steps that i have done:
1.! created the repository in csadmin and oac0
2.Then it comes up with the ContentServer administration screen
3.Then i create the repository but when i display the new repository it says it doesnt exist
4.So i went into transaction SE38 and ran report RSCMST and it comes up with errors :HTTP error 405 method not allowed for the following test programs:
RSCMSTH0,RSCMSTH1,RSCMSTH2,RSCMSTH3
5. Below are the settings on the content Server in /export/home/sapcs/conf/cs.conf
TraceLevel=warning
AdminSecurity=0
AdminSecurityGroup=sapsys
ContRepRoot=/content_storage
ContentStorageHost=SDFVB00
ContentStorageName=SDB
StorageDriver=SAPDBStorage
Storage=ContentStorage.dll
PSEDir=/export/home/sapcs/security
So my questions are :
1.Why am i getting a me message saying Do you want to open or save content server when i run the test http://90.90.90.90:1090/ContentServer/ContentServer.dll?serverInfo
2.Where is the link between the repository on ContentServer and the SAP backend?(thro the ip address/hostname and port number?)and to the repository name?
3.Is the repository on CS and SAP backend supposed supposed to have the same ?
Any ideas will be welcome
↧
Error reading infotype 1520
Hi All
I am getting the below error when I am using compensation planning :-
As I am new to ECM so I am not able to undersatnd the error.
Can anyone tell me what is the meaning of this error?
Thanks in Advance
Rahul
↧
Content server config Problem
Hello Experts,
While configuring content server we are getting error "
HTTPIO_ERROR_READ_SECURE_STORAGE-Fehlermeldung
beim Senden der Daten."
in OAC0 and OACT configs are done fine. after while opening CSADMIN we are facing this error.
Please suggest.
↧
Attachments in FB03 with SOFFDB
Hello
I installed a content server at UNIX level and configured Archive link with HTTP Content server. Then I switched the content repository 'SOFFDB' in OAC0 from System Database to the 'HTTP Content server' and the connection is fine. Later I was able to attach a pdf from FB03 and could see it in my Content repository too.
Now I would like to have a new content repository created in OAC0 which is a copy of SOFFDB and when I attach any pdf's from FB03, it should be using the new content repository. But I am unable to find out where FB03 attachments are configured to be stored in SOFFDB.
Normally all the archive link repositories will be updated in OAC3 where I can change, but SOFFDB is not updated there as it is not archive link based.
Where else can I look for FB03 attachments pointing to SOFFDB which can be changed to my newly created content repository.
Currently I have changed SOFFDB to point to my content server, but I would like to have FB03 attachments use my new content server.
Regards
VK
↧
↧
Integrating report in a case record and get context
Hi experts,
I want to integrate a custom report in a case record and be able to catch the context (Case GUID or CASE_ID...) for executing properly my custom report.
For integrating a report in a record using service provider for report (type RM_PS_SPS_REPORT), I assign to the node of the model the value of the attribute i would need for executing properly my custom report, to the context parameter VSELNAME. For example: REC=SRM_DOC_ID.
Moreover, in the property of my element type 'ZRM_PS_SPS_REPORT', i also set the value 'SRM_RFC_SUBMIT_REPORT' to the parameter ID 'FUNCTIONMODULE_EXECUTE'.
When executing the report node, I will get the value of SRM_DOC_ID in my SRM_RFC_SUBMIT_REPORT (in the structure table rspar) and then I can launch with the context my custom report.
This is not working with case record (structure tabe rspar is empty: an exeception occurs in the CL_SRM_SP_PROP_REPOSITORY) .
How could I achieve this requirement in a case record?
Thanks in advance,
Regards,
Frédéric
↧
SSF KERNEL ERROR: Signer error
Hi,
I am trying to setup digital signature for DMS and I am getting the above error (Message - 1S305).
We are trying to use the system user id/password for signatures. Anyone faced the same issue?
Regards,
Edwin
↧
Is there a possibility of scanning vendor invoices directly to the content repository?
Hi guys,
I am working on a implementation project for SAP VIM by OpenText. This solution normally involves scanning clients which are doing the transferring of the scanned invoices to the content repository. OpenText normally uses Enterprise Scan, which will require manual indexing of the relative information (i.e. company code, scan codes, etc.). The client doesn't want to do the manual indexing and they require that the invoices will just be fed to the scanner and it will automatically go to the content repository.
I just like to know if there is such a way to meet the client's requirements. They are saying that for other businesses using SAP, it is something possible. Please let me know your comments on this. Thanks!
Regards,
Jaycee
↧