Hi All
As per the business requirements, I need to integrate SAP PI and SAP ECM.
An SFTP folder shall exist on ECM system and PI should be able to read and write to this folder. Can someone provide the steps to achieve this?
Also, can folders in ECM system be accessed by other systems (SAP PI/ BODS etc) like a file system without using API's?
Regards
Vineet
Hi,
is any one know about the open text Extended ECM or SAP ECM .is both the terms are co_related
if yes how we could achive open text extended ECM thru SAP?
Hi
OpenText Enterprise Scan 10.2 with OpenText Archive Server10.5. I am trying to configure scanning will be directly indexed and archive to opentext Archive server for the OpenText Enterprise Scan client ( scanning station )
I would request anyone help me with the configuration
Thanks
Al Mamun
Hi experts,
I am working with OpenText, and I want create a Business Workspace in OpenText with the new customers in SAP.
How can do it? Any tutorial or similar?
I have integrated OpenText and SAP and the diagnostics works fine, but, I need create the Business Workspace related with customer. Any guide?
Thanks in advance,
Regards,
Hi Guys,
I am looking for the installation information for Open text Imaging.
Searched for it but could not get anything concrete.
Any leads on this would be appreciated.
Thanks and Regards,
Ankit Mishra
Hi,
I am trying to store files to our content server in sara transaction and I getting the following error:
HTTP error: 404 Not Found
Please help.
Is it possible to keep documents of Master Data Management inside Opentext Content Server ? If yes, which middleware is used to do this and can we make business references to the MDM data from Content Server.
Thank you
Hi Gurus,
I have a content server 6.40 currently running on Win 2003. As Windows 2003 Server is going out of support from Q2 2015, we had a requirement to migrate our content server on to Win 2008 with installation of latest available version 6.50
Can someone help me about the notes which specifies the pre-requisite checks/compatibility of CS 6.50 with Win 2008 and also the link to installation guide for CS 6.50 on Win 2008
Thanks,
Venkat
Hi,
I have to run an archiving process to our database that is running on IBM as400 (DB2/400 V7R1), I did some test (trying to extract the data to a windows file server but this procedure not work.
I have some experience doing this in a windows environment (sap on windows)
So, can someone have the same experience in a db2/400 ?
or do I need to install a content server to store the data?
Best regards,
Hello All,
There is a version mismatch in the Logical and Physical entries for some records in RM. ORGANIZER Transaction is unable to pull these records. I am looking for a solution to fix this issue. Appreciate your input.
SA
Dear Experts
Facing to following problem:
IPs and names replaced with X.
I had to change the connection to content server to HTTPS. In IIS everything seems fine and the following page can be displayed:
https://fqdn:1092/ContentServer/ContentServer.dll?serverInfo
Now to sap. There I wanted to change the repository to HTTPS and changed the SSL Port to 1092 and then following error is displayed:
In ICM Trace I see the following:
[Thr 7436] << End of Secu-SSL Errorstack
[Thr 7436] SSL_get_state()==0x2131 "SSLv3 read server certificate B"
[Thr 7436] SSL NI-hdl 96: local=XXX.XXX.XXX.XXX:57991 peer=XXX.XX.XXX.XXX:1092
[Thr 7436] <<- ERROR: SapSSLSessionStart(sssl_hdl=000000002ED2E2D0)==SSSLERR_PEER_CERT_UNTRUSTED
[Thr 7436] *** ERROR => SSL handshake with XXX.XXX.XXX.XXX:1092 failed: SSSLERR_PEER_CERT_UNTRUSTED (-102)
[Thr 7436] The peer's X.509 Certificate (chain) is untrusted
[Thr 7436]
[Thr 7436] SapSSLSessionStart()==SSSLERR_PEER_CERT_UNTRUSTED
[Thr 7436] SSL:SSL_connnect() failed (536872221/0x2000051d)
[Thr 7436] => "SSL API error"
[Thr 7436] >> SecuSSL ErrStack:
[Thr 7436] 0x2000051d SAPCRYPTOLIB SSL_connect
[Thr 7436] SSL API error
[Thr 7436] Failed to verify peer certificate. Peer not trusted.
[Thr 7436] 0xa0600203 SSL ssl_verify_peer_certificates
[Thr 7436] Peer not trusted
[Thr 7436] 0xa0600297 SSL ssl_cert_checker_verify_certificates
[Thr 7436] peer certificate (chain) is not trusted
[Thr 7436] Certificate:
[Thr 7436] Certificate:
[Thr 7436] Subject :CN=XXXX
[Thr 7436] Issuer :CN=XXXIssuingCA10, DC=XXX, DC=XXX
[Thr 7436] Serial number:0x5f0000029aa3d4c73fef2981bc00000000029a
[Thr 7436] Validity:
[Thr 7436] Not before :Mon Jul 27 16:20:44 2015
[Thr 7436] Not after :Sun Jul 25 16:20:44 2021
[Thr 7436] Key:
[Thr 7436] Key type :rsaEncryption (1.2.840.113549.1.1.1)
[Thr 7436] Key size :2048
[Thr 7436] PK_Fingerprint_MD5:3193 E726 99A2 F10C 97EA A73D CC6C 61AE
[Thr 7436] extensions:
[Thr 7436] AuthorityKeyId:
[Thr 7436] Significance:Non critical
[Thr 7436] Value:
[Thr 7436] Key identifier (size="20" ):42F8D3D3DBA97D29F79921B8F262898FD0084A36
[Thr 7436] SubjectKeyIdentifier:
[Thr 7436] Significance:Non critical
[Thr 7436] Value (size="20" ):8BC3DAB1F979D139CAE2731DAACD5CB67CA3EB58
[Thr 7436] Key usage:
[Thr 7436] Significance:Critical
[Thr 7436] Value:
[Thr 7436] digitalSignature
[Thr 7436] keyEncipherment
[Thr 7436] Extended key usage:
[Thr 7436] Significance:Non critical
[Thr 7436] Value:
[Thr 7436] element#no="1":ClientAuthentication (1.3.6.1.5.5.7.3.2)
[Thr 7436] element#no="2":ServerAuthentication (1.3.6.1.5.5.7.3.1)
[Thr 7436] Alternative names:
[Thr 7436] Significance:Non critical
[Thr 7436] Value:
[Thr 7436] element#no="1":
[Thr 7436] GN-dNSName :XXX
Then I added this certificate to STRUST. But still facing to the same error.
Thanks for any advices.
Kind regards
Lino
Hello,
I have installed SAP Extended ECM 10.5 Opentext with MSSQL database for SAP suite. As per the installation guide I have installed Archive and Content server. But I am facing problem to setup the repository in ECC server which connect to Opentext server.
In OAC0 transaction, what parameters value have to be given to setup up repository ??
As per guide I have created a logical archive as "A1" in client Administration, but I don't know how to use it in ECC system ?
Image may be NSFW.
Clik here to view.
I need to know what values have to be assign here to create A1 repository?
Also when I click in Protocol tab, no values are found. As per the installation guide two protocols must be shown here. I have properly run the setup but strange to see the no values in protocol tab.
Regards,
Arjun
Hi Experts-
I am looking for some pointer on my below queries-
We have Open Text Archive and Document Access for SAP. How we can utilize this system?
Software download on Service Market Place for windows is in ISO format.
Open Text Knowledge Center I am not able to download the software
Also can we use only Content Server Feature as we have no requirement for Archive at this time?
From SAP CRM system to create repository and store document is feasible and can be installed this way?
Regards
Ajay
Hi,
I am migrating from 32-bit 6.40 Content Server on MaxDB 7.5.00.51 (source) to 64-bit 6.50 Content Server on MaxDB 7.9.08.23. (target) using MaxDB Database Studio 7.9.08.27 to create backups on the source server and execute recoveries on the target server.
SAP Hostagent SAPHOSTAGENT203_203-20005735.SAR has been installed. SAP Note 2028088 for IIS roles has been installed. SAP Note 684106 has been applied (r3dllinst and vcredist) and MSVCR71.DLL has been applied. Ports 1090 and 1095 are open on the internal network for this server and the local system firewall has been disabled on the target server.
When I call the test url for the newly installed content server I receive the following:
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001";serverPatch="0";serverStatus="running";serverStatusDescription="";serverDate="2015-02-10";serverTime="16:07:14";startUpDate="2015-02-10";startUpTime="10:58:13";lastAccessDate="2015-02-10";lastAccessTime="16:04:28";
However, when I call the test url for the cache server, I receive a blank page.
When I test the connection in IIS server (Sites: SAP Cache Server: Basic Settings: Test Settings) I receive and authorization error: Cannot verify access to path (C:\Program Files\SAP\CacheServer). Details are:
"The server is configured to use pass-through authentication with a built-in account to access the specified
physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the
application pool identity has Read access to the physical path. If this server is joined to a domain, and the
application pool identity is NetworkService or LocalSystem, verify that <domain>\<computer_name>$ has Read access
to the physical path. Then test these settings again."
The permissions for the files and directories in the path are the same as for the Content Server dll.
Please advise as to whether this is an issue, or can be ignored
Cache server backup has been successfully restored. I am waiting on file transfer for the Content Server SDB restore.
Many thanks in advance for any information.
PS. Just checked the same settings for Content Server in IIS and I think the IIS Authorization error might be a red herring. Doesn't change the issue of getting a blank page in response to calling the Cache Server test url.
Dear All,
Trying to write a mass upload program to upload documents to ORGANIZER(Records Management) under path:-
RMS ID: ASR_DPF -> Expand Records ->Select Records for DPF -> Give Unique Indicator -> Select PERNR -> Expand DPF(P File) -> Expand HR folder -> and upload documents under any of the folder like OFFER LETTER or CV etc.
Attached screenshot ,want to upload document under highlighted Green area.
Can someone help me with the sample program for the same.
Also help with me with the Tables/FMS/BAPI where Hierarchy of folders: HR folder and Employee folder can be found/retrieved ?
Thanks in advance.
Ravindar.
Hi Experts,
I have a requirement of mass upload of files into DPF.
We need to pick the files from a given Unix location and create the records in employees DPF.
I am aware of the solution of creating archieve links and link them to DPF.
However, our requirement is to store documents in SAP RM under the same repository where the files in DPF gets stored.
As far as I know, only records from HCM process and forms sits in SAP RM.
I Also tried Creating the document and linking them to record. But could not execute the FM SRM_DOCUMENT_CHECKIN_VIA_TAB.
My question to the forum is, whether such requirement is feasible to map using custom code?
Please help!
Regards,
Mukesh
Hi Gurus,
I have a content server 6.40 currently running on Win 2003. As Windows 2003 Server is going out of support from Q2 2015, we had a requirement to migrate our content server on to Win 2008 with installation of latest available version 6.50
Can someone help me about the notes which specifies the pre-requisite checks/compatibility of CS 6.50 with Win 2008 and also the link to installation guide for CS 6.50 on Win 2008
Thanks,
Venkat
Dear All,
Trying to write a mass upload program to upload documents to ORGANIZER(Records Management) under path:-
RMS ID: ASR_DPF -> Expand Records ->Select Records for DPF -> Give Unique Indicator -> Select PERNR -> Expand DPF(P File) -> Expand HR folder -> and upload documents under any of the folder like OFFER LETTER or CV etc.
Attached screenshot ,want to upload document under highlighted Green area.
Can someone help me with the sample program for the same.
Also help with me with the Tables/FMS/BAPI where Hierarchy of folders: HR folder and Employee folder can be found/retrieved ?
Thanks in advance.
Ravindar.
Hello All,
Below is the functionality that we are trying to acheive : -
1) We have the facility to provide attachments at the PO item level.
2) These attachments are the DMS documents which are created in transaction CV01N.
3) Requirement is, whenever PO form is printed through messsage type automatically all the attachments (in the line item of PO) must also get printed.
We have investigated and identified the following issues until now: -
1) Printing of DMS documents involves frontend printing (i.e. SAP spool is not generated, its normal printing ). Is there a way to print this DMS document to Spool rather than using frontend printing ?
2) We can access the DMS documents data in Binary/xstring format but there is no way with which we can stream this binary/xstring data to spool ?
3) Whenever we try to print the attachments using frontend printing, incase of PDF files the file just opens and it is not printed automatically. Is there a way to print this PDF's automatically without opening it using frontend printing ?.
4) A temporary copy of the originals in the DMS documents is created in the local directory C:\tmp\. Is there a way (apart from manual way) to delete these temporary copies automatically once they are printed ?
Any help on the above issues will really help.
Thanks & Regards,
Rinkesh Doshi
Hi All,
we have installed Open Text Content Server 10.0 and Archive Server 10.0
Installation completed successfully
when we try to login to Open text using Administration client with Otadmin / <password> it says time out
we have using port 8080 in properties
further in All Programs>Open text CS>Content Server Administration it is giving HTTP Response 404
Please let me know where to see the logs or any setting to be done after installation.
thanks,
Balaji.S