Hi All,
we have installed Open Text Content Server 10.0 and Archive Server 10.0
Installation completed successfully
when we try to login to Open text using Administration client with Otadmin / <password> it says time out
we have using port 8080 in properties
further in All Programs>Open text CS>Content Server Administration it is giving HTTP Response 404
Please let me know where to see the logs or any setting to be done after installation.
thanks,
Balaji.S
Hey Guys,
There seems to be much of the confusion to implement what on WCM and ECM. Looking for some guys en light on these.
Best Regards,
Charan
Hi,
I am trying to setup digital signature for DMS and I am getting the above error (Message - 1S305).
We are trying to use the system user id/password for signatures. Anyone faced the same issue?
Regards,
Edwin
Hi
OpenText Enterprise Scan 10.2 with OpenText Archive Server10.5. I am trying to configure scanning will be directly indexed and archive to opentext Archive server for the OpenText Enterprise Scan client ( scanning station )
I would request anyone help me with the configuration
Thanks
Al Mamun
Hello
We installed SAP Content server following the guide "ContServ_UNIX_640ContServ_UNIX_640" on a new server without MAXDB. We need to use the File system as storage type. We are doing this for the first time. Below are the details
OS: Linux
Apache version 2.0
After the sapinst was successfully compelted, I am unable to proceed further with the post installation steps that says
1. Set up repositories.
2. Make the repositories known to your SAP system.
3. Issue certificates, if necessary.
4. Change the password for the database users.
In the SAP system, when I tried to create a Content repository in OAC0 by selecting 'HTTP Content Server' as the storage type, it is failing with HTTP 404 error always.
I filled the following fields while creating the content repository
Version: 0046
HTTP server: IP Address of the content server
Port: Default port
HTTP script:
Could you kindly help to answer the following:
1) Wat storage type needs to be selected for the File system. Is it Http content server, logical repository, RFC archive or Structure storage system?
2) What are the steps for the file system as storage type.
Regards
VK
Hi All,
I have implemented SAP Note 1635383 and now I want to deimplement this note. But I am getting 'Enter a valid attribute, use the input help' error while clicking on Reset SAP Note Implementation. Any one please help on the same.
Thanks in advance :-)
Regards,
Srivijay
Hi Experts,
I got a requirement to upload documents from Real Estate Contract(RECN) to RMS.
Please find below details of the standard RMS for REAL ESTATE. Can I do my changes in the standard one.
Object type | RMS-ID | Element type of record | Element type of Record Model |
Real Estate Contract | REAL_ESTATE | RE_CONTRACT_RECORD | RE_CONTRACT_MODEL |
In RECN I came across Extras -> Document management. When I clicked on Document Management, its giving error 'Model not found'. Whether creating a model will solve the issue or any other configuration part is required.?Please let me know how I can link RECN and RMS.
Also I will be grateful if anyone can send me a document which shows the intergration of RMS with any standard transaction.
Regards,
Biju K George
Hi,
I'm upgrading a very old Knowledge Warehouse version 640 running on Win2000 / SQL 2000.
I know I have to do a 2 step upgrade for the ABAP system, first to 7.0 then to 7.4 ...and we have already performed the system copy to the new VM running win 2008 / SQL 2008 and preparing the upgrade to 7.0 now.
My question is this: Do you think this approach will work?
Upgrade the ABAP system... then AFTER the upgrade is completed ....Re-Install the Java system using 7.4 DVD's and re-configure the necessary connections etc (Rather than upgrade the existing Java system). This seems much easier ....since there really is nothing in the Java system I'm aware of that we need to save ....and that cannot be re-configured.
Your thoughts are appreciated....
thanks,
Linwood
Hi Friends,
I have a question which you might be able to help with. It's to do with extracting PDF files from a Max DB - Content Server.
On our current SAP system, our invoices are stored on a content server and I was keen to understand if there would be a way of mass downloading the PDF's instead of the alternative which would be clicking into each individual invoice in the front end and downloading this way.
Thank you.
Mukesh
Hi All
Iam new to ECM just wanted to know the significance of deletion flag
Hi all,
Please suggest me, wht is the space for SAP Opentext Space in SCN.SAP??
Any space is specific to Open Text?
Thanks in advance,
Surya.
Hello All,
What will be the capabilities that will determine for implementation of ECM?
BR,
Charan
Hi All,
we have installed Open Text Content Server 10.0 and Archive Server 10.0
Installation completed successfully
when we try to login to Open text using Administration client with Otadmin / <password> it says time out
we have using port 8080 in properties
further in All Programs>Open text CS>Content Server Administration it is giving HTTP Response 404
Please let me know where to see the logs or any setting to be done after installation.
thanks,
Balaji.S
Dear Experts
Facing to following problem:
IPs and names replaced with X.
I had to change the connection to content server to HTTPS. In IIS everything seems fine and the following page can be displayed:
https://fqdn:1092/ContentServer/ContentServer.dll?serverInfo
Now to sap. There I wanted to change the repository to HTTPS and changed the SSL Port to 1092 and then following error is displayed:
In ICM Trace I see the following:
[Thr 7436] << End of Secu-SSL Errorstack
[Thr 7436] SSL_get_state()==0x2131 "SSLv3 read server certificate B"
[Thr 7436] SSL NI-hdl 96: local=XXX.XXX.XXX.XXX:57991 peer=XXX.XX.XXX.XXX:1092
[Thr 7436] <<- ERROR: SapSSLSessionStart(sssl_hdl=000000002ED2E2D0)==SSSLERR_PEER_CERT_UNTRUSTED
[Thr 7436] *** ERROR => SSL handshake with XXX.XXX.XXX.XXX:1092 failed: SSSLERR_PEER_CERT_UNTRUSTED (-102)
[Thr 7436] The peer's X.509 Certificate (chain) is untrusted
[Thr 7436]
[Thr 7436] SapSSLSessionStart()==SSSLERR_PEER_CERT_UNTRUSTED
[Thr 7436] SSL:SSL_connnect() failed (536872221/0x2000051d)
[Thr 7436] => "SSL API error"
[Thr 7436] >> SecuSSL ErrStack:
[Thr 7436] 0x2000051d SAPCRYPTOLIB SSL_connect
[Thr 7436] SSL API error
[Thr 7436] Failed to verify peer certificate. Peer not trusted.
[Thr 7436] 0xa0600203 SSL ssl_verify_peer_certificates
[Thr 7436] Peer not trusted
[Thr 7436] 0xa0600297 SSL ssl_cert_checker_verify_certificates
[Thr 7436] peer certificate (chain) is not trusted
[Thr 7436] Certificate:
[Thr 7436] Certificate:
[Thr 7436] Subject :CN=XXXX
[Thr 7436] Issuer :CN=XXXIssuingCA10, DC=XXX, DC=XXX
[Thr 7436] Serial number:0x5f0000029aa3d4c73fef2981bc00000000029a
[Thr 7436] Validity:
[Thr 7436] Not before :Mon Jul 27 16:20:44 2015
[Thr 7436] Not after :Sun Jul 25 16:20:44 2021
[Thr 7436] Key:
[Thr 7436] Key type :rsaEncryption (1.2.840.113549.1.1.1)
[Thr 7436] Key size :2048
[Thr 7436] PK_Fingerprint_MD5:3193 E726 99A2 F10C 97EA A73D CC6C 61AE
[Thr 7436] extensions:
[Thr 7436] AuthorityKeyId:
[Thr 7436] Significance:Non critical
[Thr 7436] Value:
[Thr 7436] Key identifier (size="20" ):42F8D3D3DBA97D29F79921B8F262898FD0084A36
[Thr 7436] SubjectKeyIdentifier:
[Thr 7436] Significance:Non critical
[Thr 7436] Value (size="20" ):8BC3DAB1F979D139CAE2731DAACD5CB67CA3EB58
[Thr 7436] Key usage:
[Thr 7436] Significance:Critical
[Thr 7436] Value:
[Thr 7436] digitalSignature
[Thr 7436] keyEncipherment
[Thr 7436] Extended key usage:
[Thr 7436] Significance:Non critical
[Thr 7436] Value:
[Thr 7436] element#no="1":ClientAuthentication (1.3.6.1.5.5.7.3.2)
[Thr 7436] element#no="2":ServerAuthentication (1.3.6.1.5.5.7.3.1)
[Thr 7436] Alternative names:
[Thr 7436] Significance:Non critical
[Thr 7436] Value:
[Thr 7436] element#no="1":
[Thr 7436] GN-dNSName :XXX
Then I added this certificate to STRUST. But still facing to the same error.
Thanks for any advices.
Kind regards
Lino
Hello
We have a Problem with the own Content Server.
When we start the Report RSCMST with the Content Repository, we get a error in the RSCMSTH2 (docProt).
Unfortunately I havenot found a solution.
Thelogswere viewed.
I thinkit is up tothe settings inCRorin the content server.
Does anyone havean idea?
Thanks.
Best Regards
Dominik
Hello All,
Could any one explain me who is responsible person for the configuartion of Content Repository & Content server Administration i.e. /OAC0 Transaction in IMG?
Whether it is BASIS Administrator or it should be done by DMS Functional consultant? I need this information as I am a DMS functional consulatnt & I am not much sure how to do this configuration of DMS server.
Thanks
Pkumar
I install B1 server 9.0 con windows server 2012 from amazon server, when i try no connect my B1 client 9.0 on the same server the connection works fine, buy when i try no connect B1 remote client from any machine, the logon screen don’t show any data company and in the current server show MSSQL2012 in local server, and put error message "Failed to connect license server”, i check:
i try everything, please help.
Hello
We installed SAP Content server following the guide "ContServ_UNIX_640ContServ_UNIX_640" on a new server without MAXDB. We need to use the File system as storage type. We are doing this for the first time. Below are the details
OS: Linux
Apache version 2.0
After the sapinst was successfully compelted, I am unable to proceed further with the post installation steps that says
1. Set up repositories.
2. Make the repositories known to your SAP system.
3. Issue certificates, if necessary.
4. Change the password for the database users.
In the SAP system, when I tried to create a Content repository in OAC0 by selecting 'HTTP Content Server' as the storage type, it is failing with HTTP 404 error always.
I filled the following fields while creating the content repository
Version: 0046
HTTP server: IP Address of the content server
Port: Default port
HTTP script:
Could you kindly help to answer the following:
1) Wat storage type needs to be selected for the File system. Is it Http content server, logical repository, RFC archive or Structure storage system?
2) What are the steps for the file system as storage type.
Regards
VK
CV04N is great for searching for documents in SAP DMS. The problem is when you want to search for a specific version of a document using a long list of document numbers and versions. Yes it is possible to paste a list of document numbers and version numbers into CV04N, but the problem is that all versions in the version list are used as search criteria for each document in the document list. What I want is for CV04N to search for the first document in the document list (eg. 123) along with the first version in the version list (eg 01). The second document in the list (eg. 457) I'd like to use the second version (eg 05) in the list as the search criteria, etc, etc.
Is there a way to do this with standard CV04N? Is there customization available?
Thanks,
Joe Schmitz
Hi Experts,
I have a requirement of mass upload of files into DPF.
We need to pick the files from a given Unix location and create the records in employees DPF.
I am aware of the solution of creating archieve links and link them to DPF.
However, our requirement is to store documents in SAP RM under the same repository where the files in DPF gets stored.
As far as I know, only records from HCM process and forms sits in SAP RM.
I Also tried Creating the document and linking them to record. But could not execute the FM SRM_DOCUMENT_CHECKIN_VIA_TAB.
My question to the forum is, whether such requirement is feasible to map using custom code?
Please help!
Regards,
Mukesh