Quantcast
Channel: SCN : Popular Discussions - Enterprise Content Management (SAP ECM)
Viewing all 2566 articles
Browse latest View live
↧

Http error 405 method not allowed Content Server 6.40

May 18, 2012, 3:12 am
$
0
0

Hello gurus

 

Iam trying to configure SAP Content Server 6.40 on a Solaris Sparc with Maxdb.The  Content Server is running on a separate box.The CS and DB installation completed successfully.I nstalled the apache web Server which i downloaded from Apache webserver and unistalled the one that comes with Solaris.

 

Iam now facing problems when i try to connect to the repostories which i  have created on the SAP backend.

 

Below are the following steps that i have done:

 

1.! created  the repository in csadmin and oac0

2.Then it comes up with the ContentServer administration screen

3.Then i create the repository but when i display the new repository it says it doesnt exist

4.So i went into transaction SE38 and ran report RSCMST and it comes up with errors :HTTP error 405 method not allowed for the following test programs:

RSCMSTH0,RSCMSTH1,RSCMSTH2,RSCMSTH3

5. Below are the settings on the content Server in /export/home/sapcs/conf/cs.conf

TraceLevel=warning

AdminSecurity=0

AdminSecurityGroup=sapsys

ContRepRoot=/content_storage

ContentStorageHost=SDFVB00

ContentStorageName=SDB

StorageDriver=SAPDBStorage

Storage=ContentStorage.dll

PSEDir=/export/home/sapcs/security

 

So my questions are :

1.Why am i getting a me message saying Do you want to open or save content server when i run the test http://90.90.90.90:1090/ContentServer/ContentServer.dll?serverInfo

2.Where is the link between the repository on ContentServer and the SAP backend?(thro the ip address/hostname and port number?)and to the repository name?

3.Is the repository on CS and SAP backend supposed supposed to have the same ?

 

Any ideas will be welcome

↧
Search

SAP ECM - SAP KM

March 4, 2014, 7:41 am
$
0
0

Hi to All

 

I need to know, what is the difference between SAP ECM and SAP KM, is there any difference?

 

Thanks in advance

 

Regards

 

Dario R.

↧
↧

CV01N document status "released" but red traffic light icon

November 21, 2012, 3:19 am
$
0
0

Hi,

 

I created  an attachement for the vendor master and selected the status "released".

 

My expectation was that the red icon symbol of the "document data" view, became green but it wouldn't work.

What is the customizing path to fix this issue so that red icon will become green when document status will be released ?

 

Thanks

Best regards

↧

SSF Kernel Error

January 22, 2014, 7:44 pm
$
0
0

Hi I am trying to import license for the portal, and I am getting error.

screenshot2.jpg

 

so i did some research and tried to do follow the note     662340 - SSF Encryption Using the SAPCryptolib

, but realized that the steps are rathering confusing.

I am confused at the part

Configuring Application-Specific Settings

Not sure what I am supposed to achieve or do there?

 

screenshot2.jpg

 

Can anyone please guide me, tks.

↧

Creating New ECM Repository

June 9, 2014, 6:00 am
$
0
0

HI All,

 

I want to create new ecm repository, which should support CMIS. My question is how will I create this repository, what will be the url.
Will I be able to access this url from browser as other CMIS supporting server give that functonality?

 

Thanks A Lot

↧
↧

Budget Numbers Not Showing up (CUSTOM IMPORT)

July 14, 2014, 12:44 pm
$
0
0

Dear Experts,

 

When I execute T-code PECM_START_BDG_BSP and I click on budget maintenance and try hitting "CUSTOM IMPORT" i am unable to see any dollar amounts in front of the budget. Does anyone know what the reason might be? Speedy responses would be GREATLY appreciated!!

 


↧

Unable to upload document in RMS

July 14, 2014, 12:38 am
$
0
0

Hi Experts,

 

I am facing a situation which is affecting the uploading of documents in production environment.

 

I have added new folders to an already existing Model Structure. Since there was some inconsistency in development server, I have added the new folders in Sandbox which is a copy of the production system.

 

After adding new folders, I have created a new version in Sandbox. After that users are not able to upload documents in production system. But I am able to upload the documents in Sandbox.

 

Please find below the error that we are getting in production system while uploading documents.

 

2.jpg

1.jpg

Also in sandbox in the Organizer we are not able see the POID Directory ID for the Document and Model. Please find the screen shot below.

 

3.JPG

 

 

Kindly help me in sorting out this issue. I will be very grateful to you if you can give me a solution for this since it is affecting the production environment.

 

 

Regards,

Nishad

↧

CV04N search with multiple documents and versions

May 15, 2013, 2:26 pm
$
0
0

CV04N is great for searching for documents in SAP DMS.  The problem is when you want to search for a specific version of a document using a long list of document numbers and versions.  Yes it is possible to paste a list of document numbers and version numbers into CV04N, but the problem is that all versions in the version list are used as search criteria for each document in the document list.  What I want is for CV04N to search for the first document in the document list (eg. 123) along with the first version in the version list (eg 01).  The second document in the list (eg. 457) I'd like to use the second version (eg 05) in the list as the search criteria, etc, etc.

 

Is there a way to do this with standard CV04N?  Is there customization available?

 

Thanks,

 

Joe Schmitz

↧
Search

SMTP mail service log

May 22, 2013, 7:26 am
$
0
0

We have a SAP Portal 7.3 with a SMTP regularly configured in "System configuration/KM/CM/Global service".

A Java application sends email to specific email address via the SMTP gateway.

 

Is there a way to see a log of smtp email requests started from the SAP Portal ?

 

Thank you,

Luigi

↧
↧

Open text CS not logging in

June 25, 2013, 6:51 am
$
0
0

Hi All,

 

we have installed Open Text Content Server 10.0 and Archive Server 10.0

Installation completed successfully

 

when we try to login to Open text using Administration client with Otadmin / <password> it says time out

we have using port 8080 in properties

 

further in All Programs>Open text CS>Content Server Administration it is giving HTTP Response 404

 

Please let me know where to see the logs or any setting to be done after installation.

 

thanks,

Balaji.S

↧

Integrating SAP ECM and SAP PI

March 17, 2014, 2:32 am
$
0
0

Hi All

 

As per the business requirements, I need to integrate SAP PI and SAP ECM.

An SFTP folder shall exist on ECM system and PI should be able to read and write to this folder. Can someone provide the steps to achieve this?

 

Also, can folders in ECM system be accessed by other systems (SAP PI/ BODS etc) like a file system without using API's?

 

Regards

Vineet

↧

SAP workflow architect with 9 years, newbie to OpenText VIM

June 10, 2014, 8:56 am
$
0
0

Hi,

I understand that unlike SAP workflow, most of the out of the box requests which clients come up in OpenText, are to be done by the use of ABAP classes and configuration. Please let me know a suitable place, where I could learn this or let me know, what exactly is to be done here.

Thanks!

Varges.

↧

Printing of DMS documents (attachments of PO) when PO is printed

May 14, 2012, 7:56 am
$
0
0

Hello All,

 

Below is the functionality that we are trying to acheive : -

 

1) We have the facility to provide attachments at the PO item level.

2) These attachments are the DMS documents which are created in transaction CV01N.

3) Requirement is, whenever PO form is printed through messsage type automatically all the attachments (in the line item of PO) must also get printed.

 

We have investigated and identified the following issues until now: -

 

1)  Printing of DMS documents involves frontend printing (i.e. SAP spool is not generated, its normal printing ). Is there a way to print this DMS document to Spool rather than using frontend printing ?

 

2) We can access the DMS documents data in Binary/xstring format but there is no way with which we can stream this binary/xstring data to spool ?

 

3) Whenever we try to print the attachments using frontend printing, incase of PDF files the file just opens and it is not printed automatically. Is there a way to print this PDF's automatically without opening it using frontend printing ?.

 

4) A temporary copy of the originals in the DMS documents is created in the local directory C:\tmp\. Is there a way (apart from manual way) to delete these temporary copies automatically once they are printed ?

 

Any help on the above issues will really help.

 

Thanks & Regards,

Rinkesh Doshi

↧
↧

Is there a possibility of scanning vendor invoices directly to the content repository?

June 20, 2013, 8:56 pm
$
0
0

Hi guys,

 

I am working on a implementation project for SAP VIM by OpenText. This solution normally involves scanning clients which are doing the transferring of the scanned invoices to the content repository. OpenText normally uses Enterprise Scan, which will require manual indexing of the relative information (i.e. company code, scan codes, etc.). The client doesn't want to do the manual indexing and they require that the invoices will just be fed to the scanner and it will automatically go to the content repository.

 

I just like to know if there is such a way to meet the client's requirements. They are saying that for other businesses using SAP, it is something possible. Please let me know your comments on this. Thanks!

 

Regards,

Jaycee

↧

Budget Numbers Not Showing up (CUSTOM IMPORT)

July 14, 2014, 12:44 pm
$
0
0

Dear Experts,

 

When I execute T-code PECM_START_BDG_BSP and I click on budget maintenance and try hitting "CUSTOM IMPORT" i am unable to see any dollar amounts in front of the budget. Does anyone know what the reason might be? Speedy responses would be GREATLY appreciated!!

 


↧
Search

Service provider called: Incorrect SP object status.

July 16, 2014, 8:26 am
$
0
0

Hi,

I am trying to access  the Record Model with version 6. At this point of time I am getting an error  "

Service provider called: Incorrect SP object status."

 

I am not sure what needs to be done .

 

All I have done is, I had added a folder structure and moved to  a target(PRD COPY) system .

 

Also when i checked (PRD COPY) the Record model information (by right click on record model) then, in the technical information I am getting the another error.

"POID Directory ID: An error has occurred while reading the XML file "
If I am trying to access the just previous version 5, then I am getting an application error and system goes to a dump.
Again if I am trying to access version 4 which was active and running at the point of making version 5 & 6 ,it is opening up in the display mode.
Regards,
Nishad
↧

System Copy RMS (SAP Folder Management)

December 4, 2013, 5:19 am
$
0
0

Hi experts,

 

I have a problem, each time I done a system copy from R3 Productive to R3 Test the RMS is de-configured and I can not view the documents.

 

How can avoid it? How should did the copy?

 

Thanks in advance,

Regards,

↧
↧

facing issue with creation of 'News Authoring' iView' in SAP Portal

March 19, 2012, 1:05 am
$
0
0

Dear All,

 

I am not able to create facing issue with creation of 'News Authoring' iView' in SAP Portal for News Creation admin form. pls send me how to create new iiew for News form.

 

Regards

Sam

↧

SAP netweaver Folder Management(Records and Case Management)

July 10, 2014, 5:49 am
$
0
0

Hi,

 

Can anyone tell me the Basics of SAP Records and Case Management.

 

Configurations Involved and Integration s with the other Modules???

 

Regards,

Veeramani

↧

Service provider called: Incorrect SP object status.

July 16, 2014, 8:26 am
$
0
0

Hi,

I am trying to access  the Record Model with version 6. At this point of time I am getting an error  "

Service provider called: Incorrect SP object status."

 

I am not sure what needs to be done .

 

All I have done is, I had added a folder structure and moved to  a target(PRD COPY) system .

 

Also when i checked (PRD COPY) the Record model information (by right click on record model) then, in the technical information I am getting the another error.

"POID Directory ID: An error has occurred while reading the XML file "
If I am trying to access the just previous version 5, then I am getting an application error and system goes to a dump.
Again if I am trying to access version 4 which was active and running at the point of making version 5 & 6 ,it is opening up in the display mode.
Regards,
Nishad
↧
Viewing all 2566 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>